Setting The Time; Chapter 4 - Setting The Weekly Program - Friendly Robotics Robomow RL1000 Operating & Safety Manual

Setting the Weekly Program

4.1 Setting the Time

The first step before setting the weekly program is to set the current time: day of the week and clock. Note
that the clock is on a 24-hour military time scale. For example, 2 pm is shown as 14:00.
There are two options to set the time. See figure 4.1.
Robomow in Docking Station Robomow in Docking Station
and Manual Controller and Manual Controller
in its holder in its holder
Manual Depart Manual Depart
Press GO Press GO
Press once the lower Press once the lower
scrolling arrow scrolling arrow
44
Chapter 4
Robomow on the lawn Robomow on the lawn
and Manual Controller and Manual Controller
in Users' hands in Users' hands
Manual Manual Manual
User Options User Options User Options
User Preferences User Preferences
Press GO Press GO
Docking options Docking options
Press GO Press GO
Weekly program Weekly program
Press GO Press GO
Time: _ _ _ _: _ _ Time: _ _ _ _: _ _
Press GO Press GO
M T W T F S S M T W T F S S
Press GO Press GO
Tuesday Tuesday
Next digit Next digit
Tuesday Tuesday
Next digit Next digit
Figure 4.1 – Setting the Current Day and Time
Press 'GO' Press 'GO'
Scroll up or down until the Scroll up or down until the
'Docking options' is displayed 'Docking options' is displayed
Press 'GO' Press 'GO'
Scroll down until the Scroll down until the
'Time' is displayed 'Time' is displayed
Press 'GO' Press 'GO'
Scroll to the day Scroll to the day
and Press 'GO' and Press 'GO'
Scroll to set the clock Scroll to set the clock
00:00 00:00
and Press 'GO' and Press 'GO'
for the next digit for the next digit
('C' is used to go back) ('C' is used to go back)
11:30 11:30
Press 'GO' to confirm Press 'GO' to confirm