Heating While Driving - Webasto Dual Top Evo 6 Operating Instructions Manual

Integrated heater
Hide thumbs Also See for Dual Top Evo 6:
Table of Contents

Advertisement

Dual Top Evo 6
NO WATER control
When winter mode (heating with hot water production) is selected, but the boiler is
without water, there will be a warning on the control panel.
The green LED with the winter mode icon, heating without hot water production (3),
will flash.
In this case, the operating mode selector knob (A) on the control panel must be set to
the winter mode, heating without hot water production (3) and water filled into the
boiler if required.
Leaving mode selector knob (A) in the position winter mode, heating with hot water
production (4), but filling the boiler with water may lead to automatic drainage of the
boiler at temperatures lower than +6 ºC.
Fig. 3
No water signal
LED
4.2.4

Heating while driving

Heating the cabin and/or water while driving the vehicle is possible and allowed.
Attention when driving in cold conditions:
Run the Dual Top Evo 6 in winter mode (heating with hot water production) to protect
the water pipes outside the vehicle against frost.
Operating Instructions
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents