Vf/Sdi Menu; Display Info Menu - Sony F65 Operation Manual

4-2-2 VF/SDI Menu

Page Configuration
item
<Signal Select> Color
Output signal
settings
<LUT> LUT Select
Look-up table
settings
Hi/Lo Key Mark

4-2-3 Display Info Menu

Page Configuration
item
<Mix> [Status/Menu] VF
Status, marker
display settings
SDI
[Marker] VF
SDI
<Status1> FPS
Status indicator
ND Filter
display item
settings Color Temperature
Exposure Index
Electronic Shutter
Rotary Shutter
Media Remain
<Status2> Battery DC IN 12V
Status indicator
display item
Battery DC IN 24V
settings
Message
LUT
Rec
<Marker> Center
Marker indicator
Effective
display item
settings
Ratio
40
VF Menu List
Default Settings
Color Color, R, G, B
709(800%) 709(800%), S-Log
On On, Off
Default Settings
On On, Off
On On, Off
On On, Off
On On, Off
Off On, Off
Off On, Off
Off On, Off
Off On, Off
Off On, Off
Off On, Off
Off On, Off
Off On, Off
Off On, Off
Off On, Off
On On, Off
On On, Off
Off On, Off
Off On, Off
90% 70%, 80%, 90%, 100%
Remarks
Selects the output RGB channels.
Selects the LUT (look-up table).
709(800%): Signal extending the
dynamic range up to 800% based on
ITU-R709.
S-Log: Non-adjustable signal for
intended post-production processing.
Selects whether to apply the LUT.
Remarks
Displays the status/menu in the
viewfinder.
Displays the status/menu on the monitor.
Displays markers in the viewfinder.
Displays markers on the monitor.
Turns the frame rate display On/Off.
Turns the ND filter display On/Off.
Turns the color temperature display On/
Off.
Turns the EI value display On/Off.
Turns the shutter angle display On/Off
for the electronic shutter.
Turns the shutter angle display On/Off
for the mechanical rotary shutter.
Turns the media remaining display On/
Off.
Turns the 12 V supply voltage display
On/Off.
Turns the 24V supply voltage display On/
Off.
Turns the message display On/Off.
Turns the LUT file name display On/Off.
Turns the recording indicator On/Off.
Turns the center marker On/Off.
Turns the effective pixel area marker
display On/Off.
When Effective is set to On, this sets the
effective range from all pixels.