Setting The Video Format - Sony F65 Operation Manual

1 Video format
2 Shutter value
3 ND filter
4 Sensitivity (EI value)
5 Highlight latitude
6 Color temperature
7 Look-up table (LUT)
Settings page 2
2
1 Fan operating mode
2 Voltages
3 Media remaining
4 Timecode
Settings page 3
1
3
5
1 ASSIGN button 1
2 ASSIGN button 2
3 ASSIGN button 3
4 ASSIGN button 4
5 Subdisplay brightness
6 Self diagnostics
To change a setting
Press and hold the SETTING button for 1 second or longer.
The screen changes to Settings Change mode, and the
selected item is displayed in inverse text.
In this mode, the item you want to set is selected by turning
the MENU SEL/ENTER dial. When the item you want to
set is shown in inverse text, press the MENU SEL/ENTER
dial.
Where there are multiple configuration items, the select
screen is displayed.
1
3
4
2
4
6
Select screen (e.g. shutter value)
On this screen, turn the MENU SEL/ENTER dial to select
an item. Press the MENU SEL/ENTER dial to display the
change screen for the item.
Change screen (e.g. shutter value)
The current value of the setting is displayed at the top right
of the screen. Turn the MENU SEL/ENTER dial to select
the value, then press the MENU SEL/ENTER dial.
The value for the selected item is entered, and the display
returns to the previous page.
To cancel a changed setting
Press the BACK button before confirming the changed
setting.
The setting is restored to the original value, and the display
returns to the previous page.
Note
Pressing the VF MENU button enables menu operation in
the viewfinder or on a monitor, and disables operation
using the subdisplay.
Subdisplay when VF MENU button is pressed

3-3-2 Setting the Video Format

The camera supports the following video format settings.
Setting Frame rate (fps)
23.98p 23.98
29.97p 29.97
59.94p 59.94
24p 24
25p 25
Scan mode
Progressive
Progressive
Progressive
Progressive
Progressive
Basic Settings using the Subdisplay
25