Preparing The Power Supply - Sony F65 Operation Manual

3
Connect the CBK-WA01 cable to a USB connector on
the camera. Wrap excess cable length around the cable
holder.
2-6 Preparing the Power
Supply
Cable holder
This camera operates on DC 12 V (10.5 V to 17 V).
To supply power to the camera, attach the supplied 8-pin
power cable connector to a commercially available
shielded cable, and then connect the cable to the DC IN
connector (LEMO 8-pin) on the camera.
For details on connector pin assignments, see "Connector
Pin Assignments" (page 55) in the Appendix. For details
on the pin connections, consult your local Sony
representative.
Note
When using the SR-R4 docked on the camera, supply
DC 11 V to 17 V power source.
To turn on the camera
Set the CAM POWER switch to the ON position, and the
camera is turned on.
Power is also supplied to viewfinder connected to the VF
connector.
12 V or 24 V power can be fed to accessories via the DC
OUT connectors. To supply 24 V power to accessories, a
24 V DC input power supply must be connected to the DC
IN connector of the camera.
For the pin assignment for the 24 V power supply DC IN
connector, see "Connector Pin Assignments" (page 55) in
the Appendix.
21

Preparing the Power Supply