Controlling From A Web Browser; Logging In - JVC GV-LS1 User Manual

Controlling from a Web Browser

You can control the unit from a web browser without installing additional software.
To watch a video via a network, "MONITORING SETTINGS" ( ➭ page 18) must be set.
Required operating environment
OS: Windows 7
Browser: Internet Explorer 9 or later

Logging in

Use "USERNAME" and "PASSWORD" of the
administrator ( ➭ page 16).
1 If the power is not turned on, press and hold the
power button to power on.
The record button starts blinking. Wait until it stops
blinking and off.
2 Start Internet Explorer, and enter "http://
(camera's IP address):80" in the address bar.
• If a wired connection is established, the factory
setting is that the camera's IP address is
"192.168.1.100".
• If the camera is connected wirelessly, the
factory setting is that the camera's IP address is
assigned automatically by the access point. For
values to be assigned, refer to the setting screen,
etc. of the access point.
• To access the camera on the Internet, enter the
URL obtained via the DDNS service instead of
the camera's IP address. ( ➭ page 18)
3 Enter the user name and password of the
administrator.
Initial setting: USERNAME "root", PASSWORD
"password".
4 Click the "LOG IN" button.
If login is successful, the "MONITOR" screen
appears.
31