Error Messages - JVC GV-LS1 User Manual

Error messages

Message
PLEASE INSERT MEMORY CARD!
NEED TO FORMAT MEMORY
CARD.
THIS CARD CANNOT BE USED
FOR RECORDING OR EDITING
ON THIS CAMERA
INSUFFICIENT AVAILABLE SPACE
SCENE QUANTITY EXCEEDED
LIMIT
CHECK CARD'S WRITE
PROTECTION SWITCH
VIDEO MANAGEMENT FILE
IS DAMAGED, RECOVERY IN
PROGRESS
MANAGEMENT FILE IS DAMAGED
RECORDING FAILURE
RECORDING CANCELLED
MEMORY CARD ERROR!
COMPATIBLE DEVICE NOT
FOUND
COMMUNICATION ERROR
OCCURRED
UNABLE TO LOG IN
CHECK THE USERNAME AND
PASSWORD
UNABLE TO SWITCH DURING
RECORDING
UNABLE TO UPDATE DURING
RECORDING
INVALID DATA INPUT
THE USERNAME IS ALREADY IN
USE
50
Check
• To record, insert an SD card into the camera.
• If a card is used for the first time after purchase or
has been used with other devices, it may need to be
formatted with this unit.
• Format the card.
• Available space is insufficient. Delete unnecessary
files.
• There are too many recorded files. Delete unnecessary
files.
• The write-protection switch of the SD card is set to the
"LOCK" position. Unprotect it.
• The management file must be recovered e.g. after
the SD card read/write operation is performed on a
computer, etc. Wait until it completes.
• The management file could not be recovered. Format
the SD card.
• The recorded file could not be saved. Check the SD
card.
• The file could not be saved, and recording was
cancelled. Check the transmission speed of the card.
• The SD card cannot be recognized. Check the card.
• No WPS-compatible device can be found. Check
if there is a distance or interference between the
devices.
• Check the connection and destination device.
• Enter the correct user name and password of the
administrator. For the administrator's account, the
initial setting of the user name is "root", and that of the
password is "password".
• You cannot open the "FILE MANAGEMENT" tab during
recording. Stop recording.
• You cannot change the "DIS"/"GAIN UP" setting during
streaming/recording. Stop streaming/recording.
• Check the type of the entered text (character, number,
single-byte/double-byte, etc.).
• You cannot register a user name already in use. Enter
another user name.
Refer to
page 26
page 44
page 44
page 35
page 35
–
–
page 44
page 26
page 26
page 26
–
–
–
page 32
–
–
–