Configuring the Camera Settings
Appropriate for Your Needs
Specify the video format, etc. appropriate
for your needs. Conﬁ gure the settings on
Logging in as an administrator
If the power is not turned on, press
and hold the [POWER] button to
The record button starts blinking. Wait
until it stops blinking and goes off.
Set the Network Setting of the
computer as follows.
IP Address: 192.168.1.2 to
192.168.1.254 (except 192.168.1.100)
Subnet mask: 255.255.255.0
Make a note of the current network
settings before operation for resetting
the network setting.
Start Internet Explorer, and enter
"http://192.168.1.100:8000" in the
Enter the user name and password
of the administrator.
Initial setting: USERNAME "root",
If login is successful, the setup screen
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/
Changing the settings
Select "NETWORK", "CAMERA", or
"MANAGE" in the left window of the
screen to change the settings. Click "+"
on the left of each item to show the sub
• "WIRED NETWORK"
For establishing a wired connection.
• "WIRELESS NETWORK"
For connecting wirelessly.
• "MONITORING SETTINGS"
For connecting via a network.
• "STREAM SETTINGS"
Format for transmitting/recording.
• "CAMERA SETTINGS"
• "COMMON SETTINGS"
Change the password of the
administrator, set the clock, etc.
• "MEDIA MANAGEMENT"
Format the SD card.
• "TURN OFF CAMERA"
Turn off the power of the camera.
* The power cannot be turned on via
For details, refer to the "Detailed User