Table of Contents
Advertisement
34
Do Not Drill or Screw Zone
When using screws to secure tile-board or other non-combustible to the front of the fireplace, make sure to avoid
the area shown below. Make sure screws penetrate no more than ½" (13mm) into the fireplace.
© Travis Industries
Installation
(for qualified installers only)
Do not drill screws into this shaded area.
Fireplace components are located in this area.
Maximum Screw Penetration = 1/2"
(long screws will hinder component access)
4140521
100-01368
Advertisement
Table of Contents
