Flip-Up Individual Footplates - Invacare NXT Generation NEXT User Manual

Main Frame

Flip-up Individual Footplates

NXT
The is shipped with individual fl ip-up
footplates attached or a solid footboard
unattached. Adjustment of the individual
fl ip-up footplates are as follows:
To adjust the height of the footplate :
1. Remove the nylon lock nut on the back
side of the hanger. Place the footplate
at the desired height. Insert the screws
through holes in the hanger tube, install
lock nut and tighten securely.
To adjust the angle of the fl ip-up footplate
2. Loosen the screws on bottom of the
footplate.
Set the footplate at the desired angle
and re-tighten.
To adjust the depth of the fl ip-up footplate
3. Loosen and remove the screws on top
of the footplate. Align the holes in the
footplate with holes in the clamp at the
desired depth install the screws and
tighten.
To fl ip the footplate
4. The individual footplates easily fl ip by
lifting underneath the footplate to fl ip
up or push down on the footplate to
fl ip down.
24