Kärcher BR VS 400 Operating Instructions Manual

Kärcher BR VS 400 Operating Instructions Manual

Floor cleaner

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Kärcher BR VS 400

  • Page 2 Operating Instructions Spare Parts List Notice d'instructions Liste des pièces de rechange BR VS 400 *USA...
  • Page 3: Table Of Contents

    Measuring out the cleaning agent 7 Steering the cleaner Changing the rotary brushes Each time before operation Operation Working in a lateral direction Working in lanes Switching off the cleaner Application instructions Application instructions Scrubbing Polishing BR VS 400 *USA...
  • Page 4: Important Information

    Close attention is necessary when used by or near children. 4. Use only as discribed in this manual. Use only manufacturer`s recommended attachments. BR VS 400 *USA GROUNDING INSTRUCTIONS CONNECT TO A PROPERLY GROUNDED OUTLET ONLY This appliance must be grounded. If it...
  • Page 5: Operating Description Of The Floor Cleaner

    English OPERATING DESCRIPTION OF DEVICE ELEMENTS THE FLOOR CLEANER The BR VS 400 has two rotary brooms rotating contrary to each other (1) The cleaner can be moved forwards and backwards when in Work is carried out in a lateral...
  • Page 6: Operation

    Place the tank onto the cleaner – Check that the tank is positioned – correctly BR VS 400 *USA Fill the tank with the required amount Hang the power cable in the strain- – of cleaning agent reliever Plug the cable into the power –...
  • Page 7: Releasing/Locking The Pushing

    Tip the pushing handle backwards Release the lower lever; Rotary brush drive OFF Tip the pushing handle forwards; The catch locks automatically BR VS 400 *USA Measuring out the cleaning agent brushes Press the upper lever; Cleaning agent feed ON Release the upper lever;...
  • Page 8: Each Time Before Operation

    Pull the lower lever; Rotary brush drive ON BR VS 400 *USA Pull the catch upwards and hold Move the cleaner to the LEFT and – RIGHT by turning the pushing...
  • Page 9: Important Information 4 Each Time After Usage

    Remove the strain-reliever agent solution on the floor covering to the level of dirt Select rotary brushes suitable for the dirt and floor covering BR VS 400 *USA Polishing Emptying the tank Remove the tank, empty and rinse with water...
  • Page 10: Connect To A Properly Grounded Transport

    Wait until any ice that may be in the – pump has been melted Only operate the upper lever now – for measuring out liquid. BR VS 400 *USA RECOMMENDED CLEANING ACCESSORIES AGENTS Rotary brush (white) Only use cleaning agents that do...
  • Page 11: Cleaning Agents

    ISO 5349 – (approx. 15°C) for approx. 80 min. upper limbs If fault cannot be rectified, have unit checked by After-Sales Service. BR VS 400 *USA 15 A 120 V (1~60Hz) 1,6 kW 1,55 kW 0,05 kW 450 m²/h...
  • Page 12 BR VS 400 *USA...

This manual is also suitable for:

1.139-1081.139-308

Table of Contents