Operating Description Of The Floor Cleaner; Device Elements; Assembly For The First Time; Installing The Rotary Brushes - Kärcher BR VS 400 Operating Instructions Manual

English
OPERATING DESCRIPTION OF
THE FLOOR CLEANER
The BR VS 400 has two rotary
*
brooms rotating contrary to each
other (1)
The cleaner can be moved
*
forwards and backwards when in
use
Work is carried out in a lateral
*
direction (large surface area
cleaned) or in lanes
Dirt is removed by the roller
*
brushes and cleaning agent (2)
Removed dirt must be cleaned up
*
by a dry/wet vacuum cleaner
Special rotary brushes (accessory)
*
are used for polishing the floor
covering

DEVICE ELEMENTS

1. Unlocking thrust clip
2. Water suck-off socket (accessory)
3. Recessed grip
4. Castors
5. Splash guard (vertically adjustable)
6. Tank fill opening
7. Sliding U-shaped protection
BR VS 400 *USA
1. Clip for water pump
2. Clip for brush motor
3. Power cable
4. Strain relief
5. Tank
6. Releasing brushes
7. Support stirrup
8. Brushes
9. Hinge
10. Turning handle for hinged clip
FIRST INSTALLATION

Installing the pushing handle

Position the lower half of the pushing
handle vertically
Adjust the upper half of the pushing
handle and fix it with the knurled
screw
Note:
Do not jam cable when fitting
5
Install rotary brushes
Carefully lay the cleaner down
–
Always use two rotary brushes of
–
the same type
Place the rotary brush with gearing
onto the drive
Press the rotary brush down and
–
place it into the thrust bearing
Install the second rotary brush as
–
described
Check that the rotary brushes are
–
in the correct position
Position the cleaner vertically
–