Releasing/Locking The Pushing; Starting/Stopping The Rotary Brushes; Measuring Out The Cleaning Agent; Steering The Cleaner - Kärcher BR VS 400 Operating Instructions Manual

English

Releasing/locking the pushing

handle
Pull the catch upwards and hold
Tip the pushing handle backwards
Tip the pushing handle forwards;
The catch locks automatically
*
Starting/stopping the rotary
brushes
Pull the lower lever;
Rotary brush drive ON
*
Release the lower lever;
Rotary brush drive OFF
*
BR VS 400 *USA

Measuring out the cleaning agent

Press the upper lever;
Cleaning agent feed ON
*
Release the upper lever;
Cleaning agent feed OFF
*
Note:
The cleaning agent feed is effected
only if the brush drive is switched on.

Steering the cleaner

Turn the pushing handle to the LEFT
Machine moves to the LEFT
*
Turn the pushing handle to the
RIGHT
Cleaner moves to the RIGHT
*

Changing the rotary brushes

Remove the tank
–
Carefully lay the cleaner down
–
Always refit two rotary brushes of
–
the same type
Press down and suspend the rotary
brushes
Remove the rotary brushes from the
gearing
7
Lay down the rotary brush on the
–
drive side (gearing)
Dismantle the second rotary brush
–
as described
Fit on a new rotary brush with the
gearing located on the drive
Press the rotary brush down and
–
place it into the thrust bearing
Install the second new rotary brush
–
as described
Check that the rotary brushes are
–
in the correct position
Position the cleaner vertically
–