Cleaning; Troubleshooting; Maintenance And Care; Frost Protection - Kärcher K 5.85 M Operating Instructions Manual

Karcher pressure washer user manual
Hide thumbs Also See for K 5.85 M:
Table of Contents

Advertisement

Maintenance and care

Risk of electric shock
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.

Cleaning

Prior to longer periods of storage, e.g. in
the winter:
Clean the fine filter in the water supply
connection: this can be easily removed
using flat-nose pliers.
Remove filter from suction hose for de-
tergent and clean with running water.
Maintenance
The appliance is maintenance-free.

Frost protection

Risk of frost
Protect the appliance and accessories
against frost.
The appliance and its accessories can get
destroyed through frost if there are any wa-
ter residues in them. To avoid damage to
them:
Store the appliance and the entire ac-
cessories in a frost-safe room.
Spare Parts
Only use original Kärcher spare parts. You
will find a list of spare parts at the end of this
document.
8
English

Troubleshooting

You can rectify minor faults yourself with
the help of the following overview.
If in doubt, please consult the authorized
customer service.
Risk of electric shock
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.
Warning
Repair works may only be performed by the
authorized customer service.
Appliance does not start
Check whether the voltage indicated on
the type plate corresponds to the volt-
age of the socket.
Check the power cable for damage.
Pressure does not build up in the appli-
ance
Check the setting at the spray lance.
Deaerate the appliance (see "Start-up")
Clean the fine filter in the water supply
connection: this can be easily removed
using flat-nose pliers.
Check all supply lines to the high pres-
sure pump for leaks or blockages.
Strong pressure fluctuations
Clean the high-pressure nozzle: Re-
move dirt and debris from the nozzle
bore with a needle and rinse through
with water towards the front.
Check the volume of incoming water.
High pressure pump leaking
Slight leakage from the high pressure
pump is normal. If the leakage increas-
es contact the authorized customer
service.
No detergent infeed
Select the low-pressure setting for the
spray lance.
Clean the filter of the detergent suction
hose.
Check the detergent suction hose for
kinks.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents