Gigaset T300PRO Manual page 43

Configuration
¤
If WinClient does not start, you can start it by double-clicking on the desktop icon or
on the entry under Programs in the Windows start menu.
The Gigaset pro icon is displayed in the notification area of the Windows task bar. The icon
is black/white as WinClient has not yet been configured, and is hence not connected to
the PABX.
¤
Open the pop-up menu by right-clicking the icon.
¤
Select Settings.
¤
Enter the external (IP) address of your Gigaset T300 PRO /
Gigaset T500 PRO PABX in the Network Host field.
¤
Enter the access data.
¤
You can retain the other settings in the Connection tab.
¤
On the left side of the General tab, specify which status information should be dis-
played in the notification area of the Windows taskbar.
¤
Below Fax Printer, on the right side of the General tab, specify the settings for sending
faxes.
– If the Confirm fax transmission option is enabled, additional confirmation is
required before a document can be sent despite the fax number being successfully
identified.
– If the Ascertain fax number from fax option is enabled, the destination number of
the fax is taken from the document itself. For this to work, the fax number must be
saved in the document with two @ symbols at both ends of the number. Example:
@@333@@
¤
If WinClient should be launched every time the system starts, then activate the Start
WinClient automatically during login option.
¤
Click Ok to save.
WinClient creates the connection to the server.
If a connection is established, then the Gigaset pro icon is shown in orange.
Usage
¤
Right-click on the Gigaset pro icon in the task bar to make calls using WinClient.
¤
Select the Quick Dial option, enter the number you wish to call and confirm this by
pressing the Enter key. The call is connected.
¤
To end a call, click on Disconnect.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
43