Conventional Railsounds Operations; Operating The Conventional Railsounds Sound System - Lionel S-2 Owner's Manual

Conventional RailSounds operations

Operating the conventional RailSounds sound system

W
hen you power up the locomotive on the track, you will hear the sounds of the locomotive at
rest. As the locomotive moves, the RPM sounds automatically increase with the locomotive's
speed. Use the volume control knob to adjust the volume (shown in Figure 3).
Whistle/Horn
Press the WHISTLE/HORN button on your transformer to sound the Horn. The sound will play
for as long as you hold the button.
Bell
Press the BELL button on your transformer to activate the bell sound. Press BELL again to dis-
continue the sound.
Figure 3. Volume control knob location
Volume control knob
7
Use a Philips
screwdriver
+
Inside the cab