Safety Information - NComputing X350 User Manual

Safety Information

Refer to the following to prevent any physical injury or loss of assets caused by damage
to the product.
A user must read this User Manual carefully before use and properly follow the
instructions.

Make sure that the place of installation is not too hot (above 35˚C), too cold
(below 0˚C) or too wet (above 85% relative humidity).

Avoid any severe impacts to the product.

Make sure that the product is not exposed to direct sunlight or any hot
machinery.

Please keep the product away from any items which have strong magnetic
properties.

Do not disassemble, repair or rebuild the product.

Please properly route all cables and power cords to avoid a tripping hazard. An
electric shock, fire, damage to the product or physical injury may occur as a
result of tripping over the cable.
Please disconnect the Cat 5e or Cat 6 cable from the product when it is not in use
for a long period of time.
X350 and X550 User Manual
Page 4