NComputing X350 User Manual page 15

7. At the "Create Password for Administrator" screen, select whether to use or
disable use of an administrator password. If you choose to use an administrator
password, enter it and retype it. Click on the "Next" button.
Note: This password only applies to the vSpace software installed on the host PC.
Resetting a forgotten password will require uninstalling and reinstalling the vSpace
software. Therefore, the system administrator needs to manage this password carefully.
Note: The NComputing Administration Console allows you to administer vSpace
software and parameters associated with the access devices on this PC. It will
automatically be installed on this system.
At this point, one of the following "ready to copy files" screens will be displayed (vSpace
4 and 5). If this is the first time vSpace has been installed on this system, the "Create
sys info file" check box will appear on the screen. Leave the box unchecked. Review
your selections and click on the "Next" button.
First time install screen
X350 and X550 User Manual
OR
Screen if vSpace has previously been installed
Page 15