NComputing X350 User Manual page 22

Below are some notes regarding installing matched X-series PCI cards and product
registration:

If you have two matched X-series cards installed in the host PC during product
registration, the vSpace registration application will register both cards at the
same time.

If you have a single X-series card installed when you register the product, during
product registration, you may select the "Register future devices in the
background" option so that if you later install a second PCI card in the host PC,
the vSpace registration application will discover and register the second card with
your information without any user intervention.

If you install a single X-series PCI card and register the product, do not select the
option to register future devices in the background, and later install a second PCI
card, you'll need to run the registration program again to activate the second
card.

If you install a second X-series PCI card after the first card's 30-day trial period
has expired, the user access devices you connect to the second card will not
start up; you'll need to register the product.

If you register the product after the trial period, you'll need to reboot the host PC
to initialize the card and start up sessions on the user access devices.
At any time during the registration process, you can use the "Back" button to return to a
previous screen to change your entries, and you can also click on the "Cancel" button to
cancel the process at that point.
At the registration program "welcome" screen, if vSpace password protection is turned
on, you will need to enter your password in the password entry dialog box that will
display. Enter the password and then click the "Next" button.
The Type of Registration screen is displayed.
X350 and X550 User Manual
Page 22