NComputing X350 User Manual page 17

Note: It is strongly recommended that all users have their own user accounts to enable
control of their own settings. If you click on the "Yes" button, the "Local Users and
Groups" Windows utility (screen shot shown below) will be displayed on an otherwise
blank overlay screen. You can right-click and select "New User..." to add each desired
individual user account. When you are finished adding users, close the "Local Users and
Groups" utility and you will be brought back to finish the vSpace installation process.
Windows Server 2008 user account management screen
Windows Server 2003 user account management screen
9. At the "vSpace successfully installed" screen, click "Close" to end the installer,
and select whether or not to immediately restart the computer (a restart is
required before vSpace can be used).
NOTE: During installation, you will be prompted to enter a default resolution setting for
the X-series stations. After installing the software you can change the resolution for all
stations connected to a single card from the Management Console. See the sections on
the Management Console for your version of vSpace later in this manual for instructions
on how to set the resolution.
IMPORTANT: Now proceed to the product registration section to register and activate
your system (required for operation beyond 30 days and for sessions longer than 1 hour
during the trial period).
X350 and X550 User Manual
Page 17