Product Registration - NComputing X350 User Manual

Product Registration

The X350/X550 PCI card contains an embedded hardware license which allows it to
support up to three/five access devices. When first installed, the X350/X550 starts a trial
license which permits you to use up to three/five attached access devices for the next 30
days. Until you register, sessions are limited to 60 minutes and a reminder info box like
the one shown below will be displayed at least once a day on every user station. If you
fail to register the X350/X550 card with NComputing (online or offline) within the 30-day
trial period, the PCI card will cease to function.
Reminder box displayed daily on each
user station attached to an unregistered
PCI card.
Allowing a card's trial license to expire will not prevent you from later registering the
card. You can always launch the vSpace Registration application from the host PC's
main screen, via :
Start > All Programs > NComputing vSpace > vSpace registration
Then perform either online or offline registration, and full PCI card functionality will be
delivered once the card is successfully registered with NComputing.
Click on
vSpace Registration
Windows Multipoint Server screen
X350 and X550 User Manual
Warning message that the 60-minute
session limit has been reached. This
message appears on user stations prior
to station shut down.
Windows Server 2003 screen
Page 21