Safety Information - NComputing X350 User Manual

Safety Information

Refer to the following to prevent any physical injury or loss of assets caused by damage
to the product.
A user must read this User Guide carefully before use and properly follow the
instructions.
Make sure that the place of installation is not too hot (above 35˚C), too cold
•
(below 0˚C), or too wet (above 85% relative humidity).
Avoid any severe impacts to the product
•
Make sure that the product is not exposed to direct sunlight or any hot
•
machinery.
Please keep the product away from any items which have strong magnetic
•
properties.
Do not disassemble, repair or rebuild the product.
•
Please properly route all cables and power cords to avoid a tripping hazard. An
•
electric shock, fire, damage to the product or physical injury may occur as a
result of tripping over the cable.
Please disconnect the Cat 5e or Cat 6 cable from the product when it is not in
•
use for a long period of time.
Page 4
X350/X550 User Manual