Micro Au Ic-Card - Motorola razr si12m Instruction Manual

micro au IC-Card

Your micro au IC-Card contains
information such as your phone
number.
The product supports only micro au
IC-Cards. You cannot use an au IC-
Card from another au cell phone or
smartphone.
■ If no micro au IC-Card is inserted... ■
The product cannot be used if any IC-Card other than a micro au IC-
Card is inserted.
If there is no micro au IC-Card inserted, you will be unable to perform the
following operations. will also be displayed.
• Making or receiving phone calls
• Packet communications
• Sending or receiving SMS (C-mail)
• E-mail (～@ezweb.ne.jp) Initial Settings and Sending/Receiving
• Viewing the phone number of the product
• Configuring UIM card lock settings
• au one-ID Settings
• Skype™｜au Settings
Apart from the above, there may be situations where essential features
such as the customer's phone number will not be available.
※Calling emergency services (110 (Police), 119 (Fire/Rescue), or 118 (Coast Guard))
■ micro au IC-Card Security Pin ■
micro au IC-Cards include a special security PIN to prevent them from
being used illegaly by a third party. This PIN is set to "1234" initially, but
you can change it to anything you want (▶P. 88).
24
micro au IC-Card
IC (Metal) Part
※
How to Insert/Remove the micro au IC-Card
• To insert or remove the micro au IC-Card, turn OFF the power to
the product and remove the MOTOROLA AC adapter or any other
microUSB plug from the device before doing so.
■ Removing the micro au IC-Card
Remove the micro au IC-Card only
after you turn OFF the power to the
product and remove the MOTOROLA
AC adapter or any other microUSB
plug from the device.
Open the slot cover and push the
micro au IC-Card slowly until you hear
it click.
Once you hear the click, use your
fingers to pull the micro au IC-Card
out towards you.
Slowly pull the micro au IC-Card all
the way out and close the slot cover.