Table of Contents
Advertisement
Do not pull on the cable to remove it. Do not swing the
Prohibited
product by the cable. Doing so may damage the connector
terminals.
Be careful not to allow dirt to collect on the stereo headset
Instruction
plug. Doing so may cause fault.
Ensure that the stereo headset plug aligns parallel to the
Instruction
stereo headphone jack on the main unit when it is inserted.
If you feel any abnormality with your skin, immediately consult
a dermatologist. Itching, rashes, eczema, etc. sometimes
Instruction
occurs depending on your physical constitution and
condition. The materials of parts used on the stereo headset
are as follows.
Usage
Location
Stereo plug
Steel
Cable
Elastomer,
polycarbonate/ABS
resin, rubber
Earbuds
Silicone rubber,
polycarbonate/ABS
resin
Earbud logo
Metal
Speaker
Metal
Materials
Surface
Processing
-
Matte coating
Glossy coating
Glossy chrome
plating
Mesh processing
Handling Precautions
These precautions are provided to ensure that performance can be fully
demonstrated. Thoroughly read these precautions to ensure correct use.
■ Precautions Common to the Main Unit, Charging
Devices, micro au IC-Card, and Peripheral Devices
●
Do not apply excess force to the product. Be sure not to put the
product into a tightly packed bag or place a heavy object on the
product in a bag. Sitting on the product in your pocket might
damage the display or internal circuit board resulting in a malfunction.
Keeping an external device connected to the microUSB terminal,
HDMI micro terminal, or stereo earphone jack might damage the
terminal resulting in a malfunction. Such damage and malfunction
are not covered by the warranty, even if there is no external damage.
●
Do not use in an extremely high/low temperature or humid
environment. (Use within an ambient temperature range of 5°C to
35°C and humidity range of 35% to 85%.)
●
Do not use in places subject to lots of dust or vibration.
●
Use a dry cotton swab to clean off the microUSB terminal, HDMI
micro terminal, or stereo earbud terminal from time to time. If these
components collect dirt, this could lead to connection problems.
Be sure not to deform the microUSB terminal, HDMI micro terminal,
or stereo earbud terminal due to excessive force when performing
any type of maintenance.
●
Clean the product with a soft dry cloth (such as the type used for
eyeglasses). Forceful rubbing with a dry cloth may scratch the
display. The display may be stained if splashes or smears are left
attached to the surface. Wiping the product using alcohol, thinner,
benzene, detergent, etc. might erase the printing on the outer
casing or cause discoloration.
13
Advertisement
Table of Contents
