REMOVING
THE SPREADER
Under-Frame
Mount
4
Tip the hopper assembly forward and lift it off of the
mount assembly.
NOTE: Empty the hopper before removing
the
spreader.
1.
Disconnect the spreader wiring harness from the
vehicle wiring harness.
Spreader Wiring Harness
~
~
~
,
5.
Remove the linchpins and hitch pins retaining the
secondary frame.
"
Vehicle Wiring Harness
NOTE: Grease the electrical
connections
using
dielectric
grease.
2.
Install the plug cover overthe vehicle harness plug.
3.
Remove the hairpin cotter pins and the hold-down
pins.
6.
Remove the secondary frame assembly from the
subframe.
Form No.13722
13
November
1998