Feature - Vision Fitness X6700HRT Owner's Manual

STABILIZING THE ELLIPTICAL TRAINER
After positioning the Elliptical
Trainer in its intended location,
check the unit's stability. Rocking or
wobbling indicates that your
Elliptical Trainer needs to be
leveled. Determine which leveler is
not resting completely on the floor.
Loosen the nut at the base of the
leveler to allow the leveler to
rotate. Now rotate the leveler to
the left or right until the Elliptical
Trainer is stable. Lock the adjustment
by tightening the nut against the rear
foot support.
SELF-POWERED FEATURE
The X6700HRT is self-powered, requiring no external power source.
When a user strides at a speed above 40 strides per minute (SPM), the
power is generated to allow the Elliptical Trainer to function properly.
Because of this self-generating feature, the console feedback will fade
away when you cease pedaling. The console does, however, use a 9-volt
battery as backup to save your feedback information for 30 seconds from
the time you stopped striding. If you resume striding within the 30 seconds,
the information will reappear. If the information does not appear within the
30 seconds, your battery may need to be plugged in or replaced.
7