Vision Fitness X6700HRT Assembly Manual

Commercial elliptical trainers

Hide thumbs Also See for X6700HRT:

Download this manual See also: Owner's Manual

Enlarged version

TOOLS & PARTS INCLUDED

6mm T-Shaped Wrench

Screwdriver

5mm L-Shaped Wrench

PARTS BOX

Power Cord

Console Mast Bracket

Console Mast Cover

Accessory Tray

Color-coded Hardware Bags

Owner's Guide

Assembly Guide

Warranty Card

13mm Wrench

6mm L-Shaped Wrench

17mm Wrench

8mm L-Shaped Wrench

500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551

toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373

www.visionfitness.com

AG18.52PRD

REV4

A s s e m b l y

G u i d e

X6700HRT

COMMERCIAL ELLIPTICAL TRAINERS

Page 1 500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551 Color-coded Hardware Bags toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373 Owner’s Guide www.visionfitness.com Assembly Guide ©2008 Vision Fitness. All Rights Reserved. 3.08 Warranty Card AG18.52PRD REV4 13mm Wrench 17mm Wrench...
Page 2: Hardware Included
X6700HRT COMMERCIAL ELLIPTICAL TRAINERS To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your new Elliptical Trainer’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
Page 3 ORANGE BAG STEP • Place a piece of packaging under the front of the unit to aid in assembly of the front foot. • Secure the front stabilizer tube to the STEP base frame plate with four socket head bolts (M8x20L) and four arc washers (8.2x18x1.5T).