Brake Drums Labor Operation/Time Codes - 1993/95 Models - Mazda 1983 RX7 Service Manual

VIBRATION/PULSATION WHILE BRAKING - PROCEDURE CAT. P, NO. 001/95
SERVICE TOOLS
The Accu-Tum (model 8750) On-Car Brake Lathe is recommended by Mazda.
The brake lathe will be available soon from MMA's National Accounts
Program at a substantial savings. When the national account is
established, a Special Tools Service Bulletin will be released which
will combine further details. However, if you wish to receive a
brochure on this brake lathe, please call Accu-Turn at (800) 551-2228.
WARRANTY INFORMATION
(Applies To Vehicles Covered Under Normal Warranty.)
Warranty Type:
Symptom Code:
Damage Code:
Part Number Main Cause: **** 33 25
Operation Number:
NOTE: 1. Unnecessary replacement of rotors will result in warranty
claim denial.
2. Brake pad replacement costs will not be warrantable for
brake judder repair.
3. If an on-car lathe is used, apply the labor time from the
table above.
NOTE: Warranty policy does not permit using an off-car brake lathe
after January 1, 1995. The next issue of the SRT microfiche
will
be revised to show new labor times.
BRAKE DRUMS LABOR OPERATION/TIME CODES - 1993-1995 MODELS
626/MX-6
Rear Brakes/Brake Drums(s), R&R (one side)
Labor Operation:
Rear Brakes/Brake Drums(s), R&R (both sides)
Labor Operation:
Brake Drum(s), Machine (one side)
Labor Operation:
Brake Drum(s), Machine (both sides)
Labor Operation:
Brake Shoe(s), R&R (one side)
Labor Operation:
Brake Shoe(s), R&R (both sides)
Article Text (p. 3)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Monday, September 03, 2001 03:36PM
A
83
9B
**** 26 25 (Rear of Vehicle - Rear Wheel
Drive Only)
P0113AMX/0.7 hrs. (Front/One Side)
P0113BMX/1.2 hrs. (Front/Both Sides)
P0214AMX/0.7 hrs. (Rear/One Side)
P0214BMX/1.2 hrs. (Rear/Both Sides)
P0201ARX/0.3 hrs.
P0201BRX/0.4 hrs.
P0201AMX/0.5 hrs.
P0201AMX/0.7 hrs.
P0204ARX/0.4 hrs.