Installation Of Tire Chains - Mazda 1983 RX7 Service Manual

ARTICLE BEGINNING
TECHNICAL SERVICE BULLETIN

INSTALLATION OF TIRE CHAINS

Model(s):
Category:
Bulletin No.:
Date:
DESCRIPTION
Tire chains may scratch or chip aluminum wheels. If chains are to be
installed, aluminum wheels should be changed to steel wheels.
Please remind your customers of the following instructions when
installing tire chains on their vehicle. These recommendations are
also explained in the vehicles owner's manual.
1. Investigate local regulations before using tire chains.
2. Use only SAE Class "S" chains, and make sure they fit the vehicle's
tires.
3. Follow the chain manufacturer's instructions.
4. Remove the steel wheel covers (if equipped) to avoid scratches or
damage.
5. Front Wheel Drive Vehicle: Secure the chains on the front tires as
tightly as possible. Retighten after one-half mile of driving.
Rear Wheel Drive Vehicles: Secure the chains to the rear wheels as
tightly as possible. Retighten after one-half mile of driving.
CAUTION:
- CHAINS MAY AFFECT VEHICLE HANDLING.
- DO NOT GO FASTER THAN 30 MPH OR THE MANUFACTURER'S RECOMMENDED
SPEED, WHICHEVER IS LOWER.
- DRIVE CAREFULLY AND AVOID BUMPS, HOLES AND SHARP TURNS.
- AVOID LOCKED-WHEEL BRAKING.
- DO NOT USE CHAINS ON THE TEMPORARY TIRE. THEY MAY DAMAGE THE
VEHICLE AND THE TIRE.
END OF ARTICLE
INSTALLATION OF TIRE CHAINS CAT. Q, NO. 005/93
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Saturday, September 08, 2001 09:51AM
All Mazda Models
"Q" Tires/Wheels
005/93
6/3/93
Article Text
1983 Mazda RX7