Turn Signal Cancel Cam; Removing Cancel Cam From Switch; Torque Specification - Mazda 1983 RX7 Service Manual

TURN SIGNAL DOESN'T CANCEL - REPLACE CANCEL CAM CAT. 14, NO. 010/85
Fig. 2:

Turn Signal Cancel Cam

4. Place the turn signal in the "OFF" position .
5. Carefully pry the cancel cam from the combination switch using a
screwdriver. See Fig. 3.
6. Install the new cancel cam to the combination switch.
NOTE: It is not necessary to apply additional grease to the cancel
cam.
Fig. 3:

Removing Cancel Cam from Switch

7. Align the tabs of the cancel cam with the holes in the steering
wheel and install the steering wheel.
NOTE: The cancel cam will be broken if the tabs are not aligned with
the holes in the steering wheel. See Fig. 4.
8. Install the steering wheel and torque the retaining nut to
specification.

TORQUE SPECIFICATION

ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Model
RX-7, 626, GLC
B2000, B2200
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Article Text (p. 2)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Monday, August 27, 2001 06:34AM
Specification
29-36 ft-lb
22-29 ft-lb