3) Place sensor and thermometer (wrapped in aluminum foil)
in container filled with oil. Place a second thermometer in container
of oil. See Fig. 6.
4) Connect a battery and test lamp to sensor connector. Test
lamp should glow. Gradually heat oil. Test lamp should go OFF when
temperature inside aluminum foil is 248-284
does not respond as outlined, replace heat hazard sensor.
NOTE:
Do not heat oil above 302
Fig. 6:
Testing Heat Hazard Sensor
END OF ARTICLE
AIR INJECTION SYSTEM
Article Text (p. 7)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Sunday, August 26, 2001 04:57PM
ø
F (150
ø
ø
F (120-140
C). If sensor
ø
C).