Candy COS 125 D User Instructions page 28

EN
The option buttons should
be selected before pressing
the START button
CREASE GUARD BUTTON
The Crease Guard function
(Not available on COTTON
programmes) minimizes
creases as much as possible
with a uniquely designed
anti-crease system that is
tailored to specific fabrics.
MIXED FABRICS - the water is
gradually cooled
throughout the final two
rinses with no spinning and
then a delicate spin assures
the maximum relaxation of
the fabrics.
DELICATE FABRICS – final two
rinses with no spinning and
then the fabrics are left in
water until it is time to
unload. When you are ready
to unload, press the "Crease
Guard" button – this will
drain.
WOLLENS/HAND WASH –
after the final rinse the
fabrics are left in water until
it is time to unload and the
button indicator blinking.
When you are ready to
unload, press the "Crease
Guard" button, this will drain
and spin ready for
emptying.
If you do not want to spin
the clothes and activate
drain only:
- Turn the programme
selector to the "OFF"
position;
- Select programme drain
only ;
- Switch on the appliance
again by pressing the
"Start/Pause" button.
28
SL
Na tipke za opcije pritisnite
pred pritiskanjem na tipko
START!
TIPKA ZA LAHKO LIKANJE
âe Ïelite, da je perilo kar
najmanj zmeãkano (ni
moÏno na programih za
BOMBAÎ), vklopite to
funkcijo. Ta edinstveni sistem
za prepreãevanje meãkanja
perila je prilagojen
posebnim vrstam tkanin.
Tkanine iz me‰anice vlaken
– voda se med zadnjima
dvema fazama izpiranja
postopoma ohlaja brez
centrifugiranja; sledi neÏno
centrifugiranje, kar
zagotavlja, da perilo ne bo
zmeãkano.
Obãutljive tkanine – zadnji
dve fazi izpiranja sta brez
centrifugiranja, po
konãanem pranju pa ostane
perilo v vodi, dokler ga ne
Ïelite pobrati iz stroja.
Takrat pritisnete na tipko za
prepreãevanje meãkanja
perila in ‰ele takrat bo stroj
izãrpal vodo in oÏel perilo.
Volna/roãno pranje – po
zadnjem izpiranju ostane
perilo v vodi, dokler ga ne
Ïelite pobrati iz stroja;
kontrolna luãka utripa.
Ko Ïelite pobrati perilo iz
stroja, pritisnite na tipko za
prepreãevanje meãkanja
perila in ‰ele takrat bo stroj
izãrpal vodo in oÏel perilo.
âe pa ne Ïelite, da bi stroj
perilo oÏel, lahko vklopite
samo izãrpavanje vode:
- Obrnite gumb
programatorja na oznako
OFF.
- Izberite program za
izãrpavanje vode
- Vklopite stroj – znova
pritisnite na tipko
START/Pavza.
D
.