Cisco EX90 User Manual page 36

Cisco TelePresence System EX90
Contents Introduction
Administrator settings—IP settings
The IP settings pane for the system lets you specify
whether to use IPv4 (below left) or IPv6 (below right).
D14724.06 User guide EX90, TC4.2, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90 The settings The settings
If IPv4 assignment is specified to be
Auto, you must save your settings to
put changes into effect.
36
User guide
Web interface Contact us
Remember to save your settings to
put changes into effect.
www.cisco.com