Display Settings - Cisco EX90 User Manual

Cisco TelePresence System EX90
Contents Introduction

Display Settings

The Display settings let you adjust:
Preferred brightness by moving the Brightness slider.
The color balance. There are four preset color
settings (Cold, Neutral, Warm and your own (Custom))
available. When you select Custom, you may use
the Red, Green and Blue sliders to specify your own
setting.
The DVI mode can be set to automatically detect the
type of video signal received, or forced to analog
or digital. The DVI mode is used when the unit is
connected to a PC to serve as a PC monitor.
D14724.06 User guide EX90, TC4.2, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90 The settings The settings
31
User guide
Web interface Contact us
www.cisco.com