Panasonic KX-TDE100 Installation Manual page 204

3.10 Connection of 2.4 GHz Portable Stations
Registering the PS
The PS must be registered to the PBX before it can be used. Programming of both the PS and PBX is
required. A PT with multiline display (e.g., KX-T7636 6-line display) is required to perform the PBX system
programming.
Note
For details about system programming using a PT, refer to "2.3.2 PT Programming" in the Feature
Guide, and "2.1 PT Programming" in the PT Programming Manual.
Entering the System Programming Mode
PT (Administrator Level)
PROGRAM/
PAUSE
PS (Using the KX-TD7684/KX-TD7694)
Press POWER
for 2 seconds.
If required
System Lock Password
PS (Using the KX-TD7680)
Press POWER
for 2 seconds.
If required
System Lock Password
PS (Using the KX-TD7690)
Press POWER
for 2 seconds.
If required
System Lock Password
Note
means default value throughout this section.
204 Installation Manual
System Password for Administrator—
#
for PT Programming
Select
"Setting Handset".
System Setting Menu
4 digits
FUNC
Select
"PS PROGRAM".
4 digits
MENU
Select
S1
"PS PROGRAM".
ENTR
4 digits S1
= 1234
Select
"System Option".
Select
"SYSTEM SET".
System Setting Menu
SEL
Select
S1
"SYSTEM SETTING".
System Setting Menu
Programming No.
3 digits
SEL
S1