Thermostat Control Model - T19En; Safety Functions; Tip Over Protection; Safe Distance Sensor - UFO MICATRONIC T23EN User Manual

Micatronic

Hide thumbs Also See for MICATRONIC T23EN:

Table of Contents

Available languages

4.2 Thermostat Control Model - T19EN

Turn the button 0 to 1, to start the heater.

Adjust the thermostat button from low to high heating

levels for your preferred room temperature. Heater

will operate in low and high power cycles to keep the

ambient temperature at the desired level.

WARNING! Heater continuously operates at low power until it is switched to "0" position

manually. Thus, it prevents you from possible dangers such as covering the heater or

wrong positioning by warning you with the visible glowing of the heating element.

UFO MICATRONIC, has "Tip Over Protection" system to prevent the risk of fire in case

of heater is tipped over. This function works differently in "Remote Control Model" and

"Thermostat Model".

"Remote Control Model" warns with a three long "beep" signal and "Er" warning on

the screen, when it is tipped over more than 30° angle. After these audible and visual

warnings, it returns back to stand by mode "H0". Press the On/Off button in order to

activate the heater again.

"Thermostat Control Model" switches off when tipped over more than 40° angle and

switches on when returned back to correct operation position.

5.2. Safety Distance Sensor (

CAUTION! This is an additional safety function. It does not prevent you against risks such

as injury and fire, by itself. Please read "Safety Precautions" section at the top of this

manual carefully.

UFO MICATRONIC is equipped with a sensor which detects the objects in front of the

command panel. This sensor reacts differently for 2 different case;

For Only Remote Control Model T23EN)

Table of Contents

Table of Contents

Micatronic t19en