Wiring; Final Installation - Quadra-Fire Garnet Series Installation & Operating Instructions Manual

Hearth & Home Technologies Inc.
1445 North Hwy., Colville, WA 99114-2008
1. Remove Top
a. Grasp both sides of the top and lift straight up.
b. Place the top in a safe location so it does not get scratched
or chipped.
2. Remove Front
a. Grasp the middle of the front and lift straight up.
b. Place the front in a safe location so it does not get
scratched or chipped.
3. Remove Screen
a. To remove the screen, lift up on the bottom of the screen
in the middle and pull forward.
b. Once it clears the bracket pull down.
c. Place in a safe location.
10/03
4035-823 Rev C
D. WIRING
Always use properly grounded, fused and polarized outlets. Always
use ground fault protection where required by electrical code.
Figure 2 - Wiring Diagram
E. FINAL INSTALLATION
GarnetE SERIES ELECTRIC FIREPLACE
WARNING!
Figure 3 - Remove Top, Front and Screen
5