Download  Print this page

Finish Up Your Work / Clean Appliance; Troubleshooting - Kärcher WV 50 Operation Manual

Window cleaner.
Hide thumbs


Table of Contents
Finish up your work / clean
Turn off the appliance.
First, release the attachment with the
pull-off lips and remove it from the suc-
tion head, then release the suction
head and remove.
Clean the suction head and the attach-
ment with the pull-off lips under running
water (do not wash in dishwater).
Caution: The basic appliance contains
electrical components. Do not clean this
under running water!
Remove the dirt water reservoir, rotate
the lock and pull out.
Empty the reservoir and rinse with clear
water. Close the reservoir again.
Let the cleaned appliance dry prior to
Charge the battery.
Storing the Appliance
Store the appliance upright in a dry


Machine does not start
Check the charge/operations display:
No signal or slowly blinking signal:
Charge the battery.
With a rapidly blinking signal: Inform
your dealer.
Streaks while cleaning
Clean the pull-off lip.
Turn the upper pull-off lip around by
pulling it out to the side, turning it
around and reinserting it.
Replace pull-off lip if required.
Adjust the dosing of cleaning solution.
Water is leaking from the air louvers
Empty the dirt water reservoir (max.
3,3 oz. content).
Replacement parts
To purchase replacement parts please visit



Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: