Table of Contents
Advertisement
Connect the Cable(s) to the Unit
Connect the ports (on the Camera
Module)
respectively, as shown in the figures.
Step 11:
Attach the Snap-on Camera Module
into/ on the Dome Camera Housing/
Plate, and screw the Module-fastened
Screw tightly with the screw driver to
secure the Camera Module.
8
with
their
cables/wires
NOTE:
The
terminal
should face the side conduit
entry for Vandal Proof IP Dome
Camera, as shown in the figure.
Vandal Proof
blocks
Lightweight
Advertisement
Table of Contents
