Table of Contents
Advertisement
STEP 4:
Thread the power and Ethernet cables
through either the side conduit entry or
back conduit entry. Then fasten the
Dome Camera's Housing/ Plate on the
Electrical Box with the two screws.
STEP 5:
Connect the power and Ethernet cables to their connectors on the Camera
Module.
STEP 6:
Attach the Snap-on Camera Module into/ on the Dome Camera's Housing/
Plate. Screw on the Torx Screw to secure the Camera Module.
STEP 7:
Access the camera browser-viewer for viewing images. Please refer to the
Dome Camera User's Manual for further details. Users can also use the
Camera's BNC Connector for video output.
Step 8:
Adjust the camera's zoom level and focal length via Zoom and Focus Ring
Screws.
23
Advertisement
Table of Contents
