Table of Contents
Advertisement
Step 6:
Insert the Dome Camera with the
attached In-Ceiling Mount into the
opening and run the Ethernet cable
through the desired cable entry.
Step 7:
Secure the Unit to the ceiling:
The In-Ceiling Mount's Wing Clamps
will draw the Dome Camera Housing/
Plate to the ceiling board until it is
completely flush with the board.
18
Note: Do Not over-tighten the
three fixing screws. If using a
power tool the slip clutch
should be set to the lightest
setting or the clamps could be
damaged.
Advertisement
Table of Contents
