Table of Contents
Advertisement
Step 3:
Unscrew
the Module-fastened
Torx
Screw, as indicated in the figure.
Step 4:
Press the sides of the Snap-on Camera
Module, as indicated in the figure, and
detach it from the Dome Camera's
Housing.
Step 5:
Fasten the Standard/ Compact Pendant
Mount onto the wall securely Run the
Ethernet cable through the Standard/
Compact Pendant Mount as shown in
the figure.
M8x30 Hex Head Machine Screw (for
Standard Pendant Mount only):
The
Standard
Pendant
Mount
is
supplied with four M8x30 Hex Head
Machine Screws for the convenience of
installation by fastening the Pendant
Mount with other metal part together.
31
Advertisement
Table of Contents
