Step 5. Attach the Snap-on Camera
Step 6. Plug-in the connectors to their
After the above steps are completed, please refer to section Hard Ceiling
installation Æ Step 13~18 for the remaining steps to complete the camera
installation.
36
Module into the Dome Camera
Housing,
and
screw
Module-fastened Screw tightly
with the screw driver to secure
the Camera Module.
corresponding
ports.
adjust the cable lines and twist
in the cable gland body to the
side conduit entry. After the
cable gland body is in, fasten the
thread-lock sealing nut until the
cable is completely covered.
the
Then