Table of Contents
Advertisement
Step 6:
Thread the Ethernet cable through the
entry of the Dome Camera's Housing.
Step 7:
Rotate the joint of Dome Camera
Housing into the entry of the Pendant
Mount, aligning the screw hole of the
joint with the one of the Pendent Mount.
Step 8:
Fix the camera housing with the supplied
M8x16 Hex Head Stainless Steel Screw
and Washers.
Step 9:
Attach the Snap-on Camera Module to
the Dome Camera Housing and tighten
the Module-fastened Torx Screw.
32
Advertisement
Table of Contents
