Table of Contents
Advertisement
Step 10:
Connect the Ethernet cable to the
camera's network connector.
Refer to the Camera Quick Guide for
details
Connector Definition.
Step 11:
Access the Camera Browser-viewer for viewing images. Please refer to
Chapter
Users can also use the Camera's BNC Connector for video output.
Step 12:
Adjust the Zoom Ring Screw to set
the desired zoom; subsequently,
modifying the Focus Ring Screw to
set the desired focal length.
Step 13:
Adjust the Camera to a desired angle by adjusting Pan/Tilt/Rotation. Pan
adjustment range is nearly 360°; rotation angle range approaches to 270°.
Tilt is adjustable between ﹣10° ~ 90°.
Step 14:
Reinstall the Plastic Inner Cover.
20
regarding
the
Accessing Camera
NOTE: Adjust the Lens carefully within the limits mentioned above,
or the cables underneath would be harmed.
Camera
in IS-DM220 User's Manual for further details.
Advertisement
Table of Contents
