7.29 Menu Screen #4 (Last Menu Screen
Starting from the first SW Update screen above, press the Down Arrow key. This will take you to the
first item on Menu screen #4. Note in the first photo of the next paragraph that there are double left
pointing arrows in the upper left corner and no double right pointing arrows in the upper right corner.
This indicates screens to the left of this one but no more Menu screens to the right; i.e. this is the last
menu of configuration icons.
7.30 Default Setting
This screen allows you to reset most machine configurations to their factory defaults. You probably
want to do a Backup (Read) operation first to save all your current settings just in case. Performing
this operation does NOT impact the serial number, the profile names, or the total shot counts.
7.31 Set Calibration Temperature of Steam Boiler Sensor
Dream GUI Addendum
S1 Dream Espresso Machine – GUI Addendum
With the "Large Square with a line in the middle" icon
displayed and the word DEFAULT SETTINGS showing
at the top of the screen, press the Menu button.
The screen asks you to press the Menu/OK button to
reset configuration values to their default. If you get to
this screen and do NOT want to reset your machine,
press either the Up or Down arrows to exit this screen
and return to Menu screen #4
(Don't Use)
With the large Triangle T icon displayed and the word
SET CALIBRAT T showing at the top of the screen,
press the Menu button.
Page 36