Names And Functions Of Indications On Remote Control - Toshiba RAS-M10NKV-E Service Manual

6-6-2. Names and functions of indications on remote cont r ol
Display
All indications, except for clock time indication, are indicated by push the [
1 1 1
1
Transmission mark
This transmission mark (
2 2 2 2 2
Mode display
Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover control,
: Dry, : Heat,
3
Temperature display
Indicates the temperature setting (17°C to 30°C).
When you set the operating mode to
setting is indicated.
4 4 4
4
Louver operation display
Indicates the louver operation. (
5
FAN speed display
Indicates the selected fan speed. AUTO or one of five fan speed levels
(LOW , LOW
+
can be indicated.
Indicates AUTO when the operating mode is either AUTO or
6
TIMER and clock time display
The time set for timer operation or clock time is indicated.
The present time is always indicated except for TIMER operation.
7
Hi POWER display
Indicates when the Hi POWER operation starts.
Push the [Hi POWER] button to start and push it again to stop
the operation.
8
PRESET display
Flashes for 4 seconds when the [PRESET] button is pushed
and hold to memorize.
mark is indicated when [PRESET] button is pushed than
4 seconds.
Push another button to turn off the mark.
ECO display
9
Indicates when the ECO is in operation.
10
COMFORT SLEEP display
Indicates when the COMFORT SLEEP is in operation.
Each time you push the [COMFORT SLEEP] button, the display
changes in the sequence of 1, 3, 5 or 9h.
11
QUIET display
Indicates when the QUIET is in operation.
) indicates when the remote control transmits signals to the indoor unit.
: Fan only)
: Fan only, no temperature
: Fix, : Swing ).
, MED , MED
+
] button.
: Cool,
, HIGH )
: Dry.
− 23 −
FILE NO. SVM-05019
10 3 1 2 8
4
11 9 5
7
• In the illustration, all indications
are indicated for explanation.
During operation, only the
relevant indications will be
indicated on the remote control.
6