Remote Control - Toshiba RAS-M10NKV-E Service Manual

6-6. Remote control

6-6-1. Remote control and its functions
RAS-M10UKCV, RAS-M13UKCV, RAS-M16UKCV
1 1 1 1
1
Infrared signal emitter
Transmits a signal to the indoor unit.
2 2 2 2
2
START/STOP button [
Push the button to start operation.
(A receiving beep is heard.)
Push the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor unit,
push the button twice.
3 3 3 3
3
Mode select button [MODE]
Push this button to select a mode.
Each time you push the button, a mode is
selected in a sequence that goes from A : Auto
changeover control,
: Heat, : Fan only, and back to A.
(A receiving beep is heard.)
3 3 3 3
Temperature butto n [TEMP.]
4
.......The set temperature is increased up to 30°C.
.......The set temperature is dropped down to 17°C.
(A receiving beep is heard.)
5 Fan speed button [FAN ]
Push this button to select fan speed. When you
select AUTO, the fan speed is automatically
adjusted according to the room temperature.
You can also manually select the desired fan
speed from among five settings.
(LOW , LOW
+
MED , HIGH
+
(A receiving beep is heard.)
Auto louver button [SWING]
6
Push this button to swing the louver.
(A receiving beep is heard.)
Push the button again to stop the louver swinging.
(A receiving beep is heard.)
Set louver button [FIX]
7
Push this button to adjust the air flow direction.
(A receiving beep is heard.)
8 On timer button [ON]
Push this button to set the ON timer.
9
Off timer button [OFF]
Push this button to set the OFF timer.
10
Reserve button [SET]
Push this button to reserve setting of time,
ON timer or OFF timer. (A receiving beep is heard.)
11
Cancel button [CLR]
Push this button to cancel ON timer and OFF
timer. (A receiving beep is heard.)
12
Sleep timer button [SLEEP]
Push this button to set the OFF timer.
(1, 3, 5 or 9 hours) (A receiving beep is heard)
13
High power button [Hi POWER]
Push this button to start the high power
operation. (A receiving beep is heard.)
]
: Cool, : Dry,
, MED ,
)
14
ECO timer button [ECO]
Push this button to start the ECO operation.
(A receiving been is heard)
15
Quiet button [QUIET]
Push this button to start the quiet operation.
(A receiving been is heard)
16
Comfort sleep button [COMFORT SLEET]
Push this button to start the comfort sleep
operation. OFF timer neccessary to set
together (1, 3, 5 or 9 hours). (A receiving been
is heard)
17
PRESET button
Push this button to operate the air conditioner
according to settings memorized. (A receiving
been is heard)
Or push the button for more than 4 seconds
to memorize the setting indicated on the remote
control and
18
Automatic operation button [AUTO]
Push this button to operate the air conditioner
automatically.
(A receiving beep is heard.)
17
18
2
15
6
7
8
12
− 22 −
FILE NO. SVM-05019
mark is indicated.
1
5
4
3
16
13
14
11
9
10