4.1 MENU DISPLAYS
The menus available are listed at the top of the
screen. Move the cursor with the arrow keys to high-
light the menu name. Press Enter to view the menu
and the arrow keys to scroll through the menu. Call
up the highlighted selection by pressing Enter.
4.2 FILE MENU
This menu manipulates new or existing files into
directories and saves files to be called up at another
time.
File Edit Transfer Hardware Test Utilities
Load
Save
Save As
Print Config
DOS Shell
About...
Quit ALT X
Figure 4-1 FILE MENU
4.2.1 LOAD
Load reads information from a stored file. The
program requests the filename to be loaded into the
buffer. The filename from a disk can be entered in the
highlighted area. Then move the cursor down with the
arrow key and highlight "Ok" and press Enter. To
select an existing file, use the arrow keys to move
down the menu list and press Enter when the high-
lighted filename is the file to load.
SECTION 4 PULL DOWN MENUS
4-1
Load File
Dir c:\example\file\load
File *.qx
file1.qx
Ok
Figure 4-2 LOAD FILE
4.2.2 SAVE
This saves the edited version of an existing file
loaded in the buffer under the same filename in the
directory and deletes the old file. Loads a new file
created in the Edit menu into the directory.
4.2.3 SAVE AS
Use Save As to save the edited version of an
existing file loaded in the buffer under a new file-
name or give a new file created in the Edit menu a
filename.
Save File
Dir c:\example\file\load
File *.qx
test.qx
Ok
Figure 4-3 SAVE FILE
PULL DOWN MENUS
..\
tmp\
Cancel
..\
tmp\
Cancel
October 1999
Part No. 001-2009-201