Controls
7
Bobbin thread control by stitch-counting
.15
● When the pre-set number for stitches have been sewn, the machine stops and the signal
● After the pedal has been released and the forwards sewing function has been operated
● The display goes off and the LED in the F1 key fl ashes as a reminder.
7
Control panel
.16
The description can be found in the separate instruction manual for the drive.
26
"Bobbin" appears on the display.
twice, the seam can be completed.
After the thread trimming operation and the bobbin change, the F1 key on the
control panel must be pressed. When sewing begins, the new pre-set counting
process begins.
Pre-setting the number of stitches, see Chapter 8.04 Setting the bobbin thread
control.
(with PicoDrive)